7 Tips For Truck Tyre Maintenance

| |

7 Tips For Truck Tyre Maintenance

7 tips for truck tyre maintenance

The tyres are the only point of contact between the truck and the road and an indispensable element to ensure safety and ensure mobility. In addition, good tyre maintenance also means better vehicle performance and, therefore, fuel savings. That is why it is so important to maintain their quality and performance. Here are 7 tips for the proper maintenance of truck tyres in Oman for heavy vehicles such as trucks.

Tyre pressure

Proper tyre inflation is the most important factor in prolonging the life of the tyres, as well as to achieve their highest performance. The tyres are optimized to have a certain amount of air in them to carry a certain load. Logically, a small variation of more or less 10% of the total air is admitted and above or below this amount, the negative effects on driving quality, fuel economy and fuel bands will begin to be noticed. A tyre that is low in air for the load it is carrying will develop irregular wear, will become more heated and will fail prematurely. With a tyre that is too inflated, the tread will wear much faster in the center and will be more vulnerable if you drive along a bad road.

+read more on how to choose a GPS car tracker for your vehicle

Wear and depth

To check the wear of the tyre, we must look at the depth of the drawing and change them when they are worn. In this way the grip and traction will be guaranteed, avoiding unpleasant surprises.

The valves

The valves and their plugs are usually made of rubber, so they end up deteriorating. With high loads, a rubber valve bends by force and ends up deteriorating. The valve plug is also important. It is the one that maintains the tightness and protects from dust and dirt. Regularly check the good condition of the valves and plugs to extend the life of the tyres.

Clean and dry air

The quality of the air inside the tyres can have a great effect on its useful life. The tyres are developed and designed to work with clean, dry air. Each air compressor must have filters and dryers to ensure that the air entering the tyre is clean and dry. If the air inside the tyre is contaminated with water, moisture can break the inner lining.


Dirt, snow, ice, salt used to avoid icy areas on roads or other debris left in the tyre drawings can cause the rubber to deteriorate prematurely. The tyres must be cleaned with soap and warm water, always avoiding the use of chemical products derived from petroleum or other solvents, as these can damage the rubber.

Driving habits

The driving technique has an important impact on tread wear. An experienced driver, following good driving and maintenance practices, could reach up to twice as many kilometers with the same tyres.


Proper tyre balancing is another critical element. Balancing helps prevent tyre wear and eliminates vibrations. It also protects the suspension, steering and transmission of the vehicle. Whenever the tyres are changed or disassembled they must be balanced.


Why Famous Abstract Paintings are sold for Millions of Dollars?

What Type of Career Requires Six Sigma Green Belt Certification?